Keithley Instruments Inc. - Accessori per Strumenti

Vai ai contenuti.

Keithley Instruments Inc.

Sezioni

PRODOTTI & SERVIZI

Portale / Prodotti

Accessori

IEEE-488(GPIB), cavetti e sonde per test, cavi, rack e kit di montaggio su rack ecc.

Cavetti e sonde per test	Cavi	Connettori, adattatori e strumenti	Dispositivo di prova	Accessori di collegamento ai comandi


Racks e kit di montaggio su Rack	Custodie portatili, alimentazione	Soluzioni interfaccia IEEE-488(GPIB)	IEEE-488 (Accessori GPIB)

Prodotti selezionati

Interfaccia PCI, IEEE-488 (GPIB)

KPCI-488LP

PCI bus compatibile
velocit di trasferimento 1.5Mbyte/s
Corrente @ 5VDC: normale 400mA, max 750mA

Interfaccia PXI, IEEE-488 (GPIB)

KPXI-488

PXI bus compatibile
velocit di trasferimento 1.5Mbyte/s
Corrente @ 5VDC: normale 400mA, max 750mA

Interfaccia USB, IEEE-488 (GPIB)

KUSB-488A

USB bus compatibile
velocit di trasferimento 1.8Mbyte/s
Corrente @ 5VDC: 500mA

About Pricing

Select One
Calibration Accessories
Custodie portatili
Software per elettrometri
Funzione e opzioni di scansione
Rack e kit di montaggio su rack
Accessori di collegamento ai comandi
Cavi
Cavi e sonde di test
Connettori/adattatori/strumenti
Apparecchiature di prova

Calibration Accessories

Model 2600-STD-RES Calibration Standard 1GOhm Resistor for Models 2635A and 2636A

Custodie portatili

Model 5801 Test Lead Pouch (for Models 5804, 5805, 5806 Test Leads)

Software per elettrometri

Model 6524 High-Resistance Measurement Software

Funzione e opzioni di scansione

Model 2000-SCAN 10-Ch, General-Purpose, Scanner Card (for Models 2000, 2001, 2002, 2010)

Models 2000/2000-SCAN Model 2000 6-1/2-Digit DMM w/ Model 2000-SCAN 10-Ch Scanner Card

Model 2001-SCAN 10-Ch Scanner Card w/ 8 Relay Inputs and 2 Solid-State Inputs (for Models 2000, 2001, 2002, 2010)

Model 2001-TCSCAN 9-Ch Scanner Card for CJC, Voltage, Resistance, and/or Freq Measurements (for Models 2000, 2001, 2002, 2010)

Model 6521 Low-Current, 10-Ch Scanner Card (for Model 6517A)

Model 6522 Low-Current, High-Impedance Voltage, High-Resistance, 10-Ch Scanner Card (for Model 6517A)

Rack e kit di montaggio su rack

Model 1010 Shelf-Type Kit for Mounting a Single Unit (for Models 175A, 175-AV, 197A, 485, 580)

Model 1017 Shelf-Type Kit for Mounting 2 Units (for Models 175A, 175-AV, 197A, 485, 580)

Model 1019A-1 Fixed Rack Mount Kit for a Single, Half-Rack-High, 127mm (5) Unit (for Models 195A, 196, 220, 224, 230, 230-1, 263, 595, 617, 740, 775A)

Model 1019A-2 Fixed Rack Mount Kit for 2 Half-Rack-High, 127mm (5) Units (for Models 195A, 196, 220, 224, 230, 230-1, 263, 595, 617, 740, 775A)

Model 1019A-2G Fixed Rack Mount Kit for 2 Half-Rack-High, Gray, 127mm (5) Units (for Models 195A, 196, 220, 224, 230, 230-1, 263, 595, 617, 740, 775A)

Model 1938 Fixed Rack Mount Kit for Mounting Units in a Standard 48.3cm (19) Equipment Cabinet (for Models 236, 237, 238)

Model 1939 Slide Rack Mount Kit (for Models 236, 237, 238)

Model 2288 Fixed Rack Mount Kit for Mounting Units in a Standard 48.3cm (19) Equipment Cabinet (for Models 228A, 590)

Model 2288-1G Fixed Rack Mount Kit for Mounting Units in a Standard 48.3cm (19) Equipment Cabinet, Gray (for Models 228A, 590)

Model 2289A Slide Rack Mount Kit (for Models 228A, 590)

Model 248-RMK-1 Fixed Rack Mount Kit for a Single Unit (for Model 248)

Model 248-RMK-2 Fixed Rack Mount Kit for 2 Units (for Model 248)

Model 4288-1 Single, Fixed Rack Mount Kit (for Models 428, 486, 487, 776, 2700, 2000 Series, 2182, 2300 Series, 2400 Series, 2500 Series, 6514, 6517A, 7001, 6430, 6485)

Model 4288-2 Dual, Fixed Rack Mount Kit (for Models 428, 486, 487, 776, 2000 Series, 2182, 2300 Series, 2400 Series, 6514, 6517A, 7001, 2700, 6430, 6485)

Model 4288-4 Fixed Rack Mount Kit (for Models 195A, 196, 220, 224, 230, 230-1, 263, 428, 486, 487, 595, 617, 740, 775A, 776, 2000 Series, 2182, 2300 Series, 2400 Series, 6512, 6514, 6517A, 7001)

Model 4288-5 Fixed Rack Mount Kit (for Models 428, 486, 487, 2000 Series, 2182, 2300 Series, 2400 Series, 6514, 6517A, 7001)

Model 4288-7 Rear Rack Mount Support Kit (for Model 2750)

Model 7002-RMK-1 Fixed Rack Mount Kit (for Model 7002)

Model 7002-RMK-2 Slide Rack Mount Kit (for Model 7002)

Model 7079 Slide Rack Mount Kit (for Model 707A)

Model 7768 Single Fixed Rack Kit (for Model 776)

Model 8000 Equipment Cabinet, Open on Both Ends (28 inches High, 19 inches Wide, 21 inches Deep)

Model 8000-10 Equipment Cabinet (10 inches High, 19 inches Wide, 21 inches Deep)

Model 8000-14A Equipment Cabinet (14 inches High, 19 inches Wide, 25.5 inches Deep)

Model 8000-17A Equipment Cabinet (17.5 inches High, 19 inches Wide, 18 inches Deep)

Accessori di collegamento ai comandi

Model 8501-1 Trigger Link Cable, DIN-to-DIN, 1m (3.3ft) (for Models 6517A, 6517B, Series 2400, KPC-TM, Trigger Link Inputs)

Model 8501-2 Trigger Link Cable, DIN-to-DIN, 2m (6.6ft) (for Models 6517A, 6517B, Series 2400, KPC-TM, Trigger Link Inputs)

Model 8502 Trigger Link to BNC Break-Out Box (for Models 7001, 7002, 2000 Series, 2400 Series, KPC-TM)

Model 8503 Trigger Link Cable, DIN-to-Dual BNC, 1m (3.3ft) (for Models 2000, 2010, Series 2400, 6517A, 6517B, Trigger Link Inputs)

Model 8505 Male DIN to 2-female DIN Y Adapter cable, 0.3m (1ft) (for Trigger Link)

Cavi

Model 1507A Low-Thermal Input Cable Terminated w/ a Model 1486 Connector on One End and 2 Copper Spade Lugs on the Other, 1.2m (4ft) (for Models 181, 182)

Model 2000-MTC-2 Cable Assembly w/ a 44-Pin Connector and One Unterminated End, 2m (6.6ft) (for Model 2000-20)

Model 2000-MTCD-2 Cable Assembly Terminated w/ a 44-Pin Connector and a 50-Pin D Subminiature Connector, 2m (6.6ft) (for Model 2000-SCAN-20)

Model 2107-30 Low-Thermal Input Cable Terminated w/ a LEMO Connector on One End and 4 Copper Spade Lugs on the Other, 9.1m (30ft) (for Model 2182)

Model 2107-4 Low-Thermal Input Cables Terminated w/ a LEMO Connector on One End and 4 Copper Spade Lugs on the Other, 1.2m (4ft) (for Model 2182)

Model 236-ILC-3 Safety Interlock Cable, 3m (10ft) (for Models 236, 237, 238, 486, 487, 8006, 8007, 8008)

Model 237-ALG-2 Low-Noise Triax Input Cable Terminated w/ a 3-Slot Male Triax Connector on One End and 3 Alligator Clips on the Other, 2m (6.6ft) (for Models 236, 237, 238, 486, 487, 6514, 6517A, 6517B)

Model 248-MHV High-Voltage Coax Cable Terminated w/ an SHV Female Connector and an MHV Male Connector, 3m (10ft) (for Model 248)

Model 248-SHV High-Voltage Coax Cable Terminated w/ an SHV Female Connector on Both Ends, 3m (10ft) (for Models 248, CS-970)

Model 2510-CAB 4-Wire Unshielded Cable (for Models 2510, 2510-AT)

Model 3722-MTC-1.5 104 Pin D-sub Male to Female Cable, 1.5m (5 ft.)

Model 3722-MTC-1.5/MM 104-pin D-sub male to 104-pin D-sub male cable (1.5m/5ft length)

Model 3722-MTC-3 104 Pin D-sub Male to Female Cable, 3m (10 ft.)

Model 3722-MTC-3/MM 104-pin D-sub male to 104-pin D-sub male cable (3m/`10ft length)

Model 4210-MMPC-C High Performance Triaxial Cable Kit (for Use with Cascade Microtech Probers)

Model 4210-MMPC-S High Performance Triaxial Cable Kit (for Use with SUSS MicroTec Probers)

Model 4801 Low-Noise, Coax Input Cable, 1.2m (4ft) (for Models 82, 485, 590, 595, 7158)

Model 4802-10 Low-Noise, Coax Input Cable, 3m (10ft) (for Models 82, 485, 590, 595, 7185)

Model 4803 Low-Noise Coax Cable Kit w/ 15m (50ft) of Low-Noise Cable, 10 Male BNC Connectors, 5 Female BNC Chassis-Mount Connectors (for Models 82, 485, 590, 595, 7158)

Model 6011 Input Leads w/ 1.5m (5ft) of Triax Cable (for Models 220, 224 617)

Model 6011-10 Input Leads w/ 3m (10ft) of Triax Cable (for Models 220, 224, 617)

Model 6517-ILC-3 4-Pin Interlock Cable, 1m (3.3ft) (for Models 6517A, 8009)

Model 7009-5 Shielded RS-232 Cable, 1.5m (5ft) (for Models 2000, 2010, 6517A, 6517B, Series 2400)

Model 7011-MTC-1 Mass Terminated Cable Assembly, 1m (3.3ft) (for Models 7011-C, 7012-C, 7013-C, 7015-C, 7018-C, 7021, 7022, 7037)

Model 7011-MTC-2 Mass Terminated Cable Assembly, 2m (6.6ft) (for Models 7011-C, 7012-C, 7013-C, 7015-C, 7018-C, 7021, 7022, 7037)

Model 7019-C-MTC-2

Model 7019-C-MTCI-2 6-Wire Kelvin Extender and Instrument Cable, 2m (6.6ft) (for Models 7019-C, 2400 Series)

Model 7020-MTC-2 Mass Terminated Cable Assembly, 2m (6.6ft) (for Model 7020)

Model 7024-10 Low-Noise Triax Cable Terminated w/ 2-Lug Male Triax Connectors, 3m (10ft) (for Models 220, 224, 263, 617, 7058)

Model 7024-3 Low-Noise Triax Cable Terminated w/ 2-Lug Male Triax Connectors, 0.9m (3ft) (for Models 220, 224, 263, 617, 7058)

Model 7025-10 Low-Noise Triax Input Cable w/ 1 Unterminated End and 1 End Terminated w/ a 2-Lug Male Triax Connector, 3m (10ft) (for Models 220, 224, 263, 617, 7058)

Model 7035-MTC-2 Mass Terminated Cable Assembly, 2m (6.6ft) (for Model 7035)

Model 7036-MTC-2 Mass Terminated Cable Assembly, 2m (6.6ft) (for Model 7036)

Model 7051-10 BNC-to-BNC Cable, 3m (10ft) (for Models 590, Switching External Triggers)

Model 7051-2 BNC-to-BNC Cable, 0.6m (2ft) (for Models 590, Switching External Triggers)

Model 7051-5 BNC-to-BNC Cable, 1.5m (5ft) (for Models 590, Switching External Triggers)

Model 7074-CIT Contact Extraction Tool (for Models 7074-KIT, 7074-MTR, 7152-KIT, 7152-MTR)

Model 7075-MTC Mass Terminated Cable Assembly, 3m (10ft) (for Models 7075 Bank/Column, 7076 Row/Column)

Model 7076-CMTC Mass Terminated Cable Assembly, 3m (10ft) (for Models 7075 Bank, 7076 Row/Column)

Model 7076-RMTC High-Isolation, Mass Terminated Cable Assembly, 3m (10ft) (for Models 7075 Row, 7076 Row)

Model 7078-CSHP 8-Cable Set w/ 4 BNC-to-Triax Adapters, Four 3-Slot Triax Cables, 4 BNC-to-BNC Coax Cables, 3m (10ft) (for Model 7072 to HP-4145)

Model 7078-DIN Model 707A Master/Slave Cable, 1.8m (6ft) (for Model 707A)

Model 7078-MTC-20 Low-Noise, Mass Terminated Triax Cable Assembly, 6.1m (20ft) (for Models 7071, 7071-4, 7074-D)

Model 7078-MTC-5 Mass Terminated Cable Assembly, 1.5m (5ft) (for Models 7071, 7071-4, 7074-D)

Model 7078-TRX-1 Low-Noise Triax Cable, 0.3m (1ft) (for Models 236, 237, 238, 6514, 6517A, 7072)

Model 7078-TRX-10 Low-Noise Triax Cable, 3m (10ft) (for Models 236, 237, 238, 6514, 6517A, 6517B, 7072)

Model 7078-TRX-12 Low-Noise Triax Cable, 3.5m (12ft) (for Models 236, 237, 238, 6514, 6517A, 7072)

Model 7078-TRX-20 Low-Noise Triax Cable, 6.1m (20ft) (for Models 236, 237, 238, 6514, 6517A, 6517B, 7072)

Model 7078-TRX-3 Low-Noise Triax Cable, 0.9m (3ft) (for Models 236, 237, 238, 6514, 6517A, 6517B, 7072)

Model 7078-TRX-5 Low-Noise Triax Cable, 1.5m (5ft) (for Models 236, 237, 238, 6514, 6517A, 7072)

Model 7078-TRX-6IN 3-Slot, Low-Noise, 0.15m (0.5ft) Guarded Triax Cable (for Model 6430)

Model 7152-MTC-10 5, Low-Noise, Matrix Expansion Cables, 3m (10ft) (for Model 7152)

Model 7152-MTC-2 5, Low-Noise, Matrix Expansion Cables, 0.6m (2ft) (for Model 7152)

Model 7152-TRX-10 5, Low-Noise, M-Series to Triax Cables, 3m (10ft) (for Models 7152, 8006)

Model 7153-TRX Low-Noise, M-Series to Triax Cables, 2m (6.6ft) (for Model 7153)

Model 7156-MTC-10 37-Conductor Cable Terminated, 3m (10ft) (for Models 7156-D, 7156-M)

Model 7164-MTC-10 50-Conductor Cable Assembly, 3m (10ft) (for Models 7164-D, 7164-M, 7164-MTR)

Model 7169-MTC-3 Twisted-Pair Cable Assembly Terminated w/ 20-Pin Connector Blocks, 3m (10ft) (for Model 7169A)

Model 7173-50-CSEP 4-Cable Set to Expand Switching Configuration, 0.6m (2ft) Each (for Model 7173-50)

Model 7705-MTC-2 50 Pin Male to Female DSUB Cable, 2m, for Use with Models 7701, 7703, 7705, 7707, and 7709

Model 7707-MTC-2 25 Pin Male to Female D Sub Cable, 2m

Model 7711-BNC-SMA Male SMA to Female BNC Cable, 6 in.

Model 7712-SMA-1 SMA Male to SMA Male Coaxial Cable, 1m

Model 7754-3 BNC-to-Alligator Cable, 0.9m (3ft) (for Model 776)

Model 8542-301 LIV Cable to connect models 2500 and 24XX to the fixture, 1.8m (6ft)

Model 8607 1kV, 2-Wire, Source Banana Test Cables, 1m (3.3ft) (for Models 2410, 6430, 6514, 6517B)

Model CA-126-1 DB25 Male to DB25 Female, Digital I/O Cable, 1.5m (5ft) (for Model 213)

Model CA-18-1 Shielded Cable Terminated w/ Dual Banana Plugs, 1.2m (4ft) (for Binding Post Inputs)

Model CA-321-1 Temperature Control Cable to connect Model 2510 to fixture, 1.8m (6ft)

Model CA-322-1 Dual Temperature Control Cable to connect (2) Model 2510 to fixture, 1.8m (6ft)

Model CA-QIVC Cable for Quad I-V Card

Model S46-SMA-0.5 SMA Cable, male to male, 0.15m (0.5ft.)

Model S46-SMA-1 SMA Cable, male to male, 0.3m (1ft.)

Model SC-22 Low-Noise Triax Cable Without Connectors, Sold By the Foot

Model SC-9 Low-Noise Coax Cable Without Connectors, Sold By the Foot

Model SC-93 Low-Thermal, 2-Conductor Shielded Cable,

Cavi e sonde di test

Model 1600A 40kV, 1000:1, Voltage Divider Probe, 2m (6.6ft) (for DMMs)

Model 1651 50 Ampere Current Shunt (for DMMs)

Model 1681 2-Wire, General-Purpose, Clip-On Test Lead Set (for DMMs)

Model 1751 2-Wire, General-Purpose, Test Probes (for Models 175A, 197A, 2000, 2001, 2002, 2010, 2015, 2016)

Model 1752 Premium Safety Test Lead Kit

Model 1754 2-Wire, Universal 10-Piece Test Lead Kit (for Models 175A, 197A, 2000, 2001, 2002, 2010)

Model 3706-BAN DMM Adapter Cable, 15-pin D-sub to banana jacks, 1.4m (4.6 ft)

Model 3706-TLK Test Lead Kit, includes 3706-BAN and Plug-in Test Lead Accessories

Model 5804 Kelvin (4-Wire) Universal 10-Piece Test Lead Set (for Models 580, 2400 Series, DMMs)

Model 5805 Kelvin (4-Wire), Spring-Loaded Probes, 0.9m (3ft) (for Models 580, DMMs)

Model 5805-12 Kelvin (4-Wire), Spring-Loaded Probes, 3.6m (12ft) (for DMMs)

Model 5806 Kelvin (4-Wire), Oversized Alligator Clip-On Leads, 0.9m (3ft) (for Models 580, 2400 Series, DMMs)

Model 5807-7 Helical Spring Point Test Leads (for Model 580, DMMs)

Model 5808 Low Cost, Single Pin, Kelvin Probes

Model 5809 Low Cost, Kelvin Clip Lead Set

Model 6517-RH Humidity Probe w/ 3m (10ft) Extension Cable (for Models 6517A, 6517B)

Model 6517-TP Thermocouple Bead Probe (for Models 6517A, 6517B)

Model 7401 Type K t/c Wire Kit w/ 30.5m (100ft) of Type K, Chromelalumel, t/c Wire (for Models 740, 2001-TCSCAN, 7057A, 7402)

Model 8501-1 Trigger Link Cable, DIN-to-DIN, 1m (3.3ft) (for Models 6517A, 6517B, Series 2400, KPC-TM, Trigger Link Inputs)

Model 8501-2 Trigger Link Cable, DIN-to-DIN, 2m (6.6ft) (for Models 6517A, 6517B, Series 2400, KPC-TM, Trigger Link Inputs)

Model 8503 Trigger Link Cable, DIN-to-Dual BNC, 1m (3.3ft) (for Models 2000, 2010, Series 2400, 6517A, 6517B, Trigger Link Inputs)

Model 8505 Male DIN to 2-female DIN Y Adapter cable, 0.3m (1ft) (for Trigger Link)

Model 8605 High-Performance Modular Test Leads, 0.9m (3ft) (for Models 2000, 2001, 2002, 2010, 2400 Series)

Model 8606 High-Performance Modular Probe Kit (for Models 2000, 2001, 2002, 2010, 2400 Series)

Model 8681 Miniature, 4-Wire RTD, 100 Ohm (for Models 2001, 2002, 2010)

Model CA-109A Test Lead Set

Connettori/adattatori/strumenti

Model 213-CON Analog Output Connector (for Model 213)

Model 2182-KIT Low-Thermal (LEMO) Connector w/ Strain Relief (for Model 2182)

Model 2188 Low-Thermal Calibration Shorting Plug (for Model 2182)

Model 2304-DISP LCD Remote Display w/ Keypad (for Models 2303 and 2304A)

Model 2306-DISP VFD Remote Display w/ Keypad (for Models 2302 and 2306)

Model 2361 Trigger Controller (for System 93)

Model 237-BAN-3A Triax-to-Banana Plug (for Models 7072, 7072-HV, 7172, DMMs)

Model 237-BNC-TRX Male BNC to 3-Lug Female Triax Adapter w/ Guard Disconnected (for Models 237, 6517A, 6517B, 7078-TRX Cables)

Model 237-TRX-BAR 3-Lug Triax Female-to-Female (Barrel) Adapter (for Triax Interconnect)

Model 237-TRX-NG Triax Male-Female Adapter w/ Guard Disconnected (for Models 236, 237, 238, 7072, 7072-HV, 7172)

Model 237-TRX-T 3-Slot Male to Dual 3-Lug Female Triax Tee Adapter (for Models 7072, 7072-HV, 7172, 7078-TRX Cables)

Model 237-TRX-TBC 3-Lug Female Triax Bulkhead Connector (for Models 7072, 7072-HV, 7172, 7078-TRX Cables)

Model 2499-DIGIO Digital I/O Expander Assembly (for 2400 Series)

Model 2500INT-FC/APC FC/APC Connector

Model 2500INT-FC/PC FC/PC Connector (for Model 2500INT-x)

Model 2500INT-SMA SMA Connector (for Model 2500INT-x)

Model 2510-RH Resistive Heater Adapter (for Model 2510)

Model 3791-CIT Contact Insertion and Extraction Tool

Model 3792-KIT104-R 104 Pin Male D-sub Connector kit (contains 2 male D-sub connectors with housings and 208 solder-cup contacts)

Model 4804 Male BNC to 2-Lug Female Triax Adapter (for Model 485)

Model 4851 BNC Shorting Plug (for Models 230-1, 7077)

Model 6147 2-Slot Male Triax to Female BNC Adapter (for Models 220, 224, 617)

Model 6167 Guarded Input Adapter (for Models 220, 224)

Model 6171 3-Slot Male to 2-Lug Female Triax Adapter (for Models 6011, 7024)

Model 6172 2-Slot Male to 3-Lug Female Triax Adapter (for Models 220, 224, 617)

Model 7001-PNL Metal Plate to Cover Empty Card Slot (for Model 7001)

Model 7011-KIT-R Female 96-Pin Connector Kit (for Models 7011-C, 7012-C, 7013-C, 7015-C, 7018-C)

Model 7011-MTR Bulkhead-Mount 96-Pin Male Connector (for Models 7011-KIT-R, 7011-C, 7012-C, 7013-C, 7015-C, 7018-C)

Model 7011-ST Extra Quick Disconnect Screw Terminal Board (for Model 7011-S)

Model 7012-ST Extra Quick Disconnect Screw Terminal Board (for Model 7012-S)

Model 7013-ST Extra Quick Disconnect Screw Terminal Board (for Model 7013-S)

Model 7014-ST Extra Quick Disconnect Screw Terminal Board (for Model 7014)

Model 7015-ST Extra Quick Disconnect Screw Terminal Board (for Model 7015-S)

Model 7018-ST Extra Quick Disconnect Screw Terminal Board (for Models 7018-S)

Model 7020-DT Extra Connector Board (for Model 7020-D)

Model 7023 2-Lug Female Triax Bulkhead Connector (for Models 6011, 7024)

Model 7037-DT Extra Connector Board (for Model 7037-D)

Model 7074-CIT Contact Extraction Tool (for Models 7074-KIT, 7074-MTR, 7152-KIT, 7152-MTR)

Model 7074-HCT Hand Crimping Tool (for Models 7074-KIT, 7074-MTR)

Model 7078-CIT Contact Insertion/Extraction Tool (for Models 7078-KIT, 7078-MTR, 7152-KIT, 7152-MTR, 7169-KIT, 7169-MTR)

Model 7078-HCT Hand Crimping Tool (for Models 7078-KIT, 7169-KIT)

Model 7078-KIT Connector Kit, 38-Pin Plug Assembly w/ Strain Relief and 40 Contacts (for Models 7071, 7071-4, 7074-D, 7078-MTR)

Model 7078-MTR Mass Terminated Receptacle, 38-Pin Bulkhead Mount w/ 40 Contacts (for Models 7078-KIT, 7078-MTC)

Model 7078-PEN Programming Light Pen (for Models 707A, 708A, 7002)

Model 7078-TRX-BNC 3-Slot Male Triax to BNC Adapter (for Models 486, 487, 4801, 6514, 6517B, 7072, 7072-HV)

Model 7078-TRX-GND 3-Slot Male Triax to BNC Adapter w/ Guard Removed (for Models 236, 237, 238, 4801, 6517B, 7051, 7072, 7072-HV)

Model 7078-TRX-TBC 3-Lug Female Triax Bulkhead Connector w/Cap

Model 7116-COVER Top Cover (for Model 7116-MWS)

Model 7152-HCT Hand Crimping Tool (for Models 7152-KIT, 7152-MTR)

Model 7152-KIT 6-Position M-Series Plug w/ Contacts (for Models 7152, 7152-MTR)

Model 7152-MTR 6-Position M-Series Receptacle w/ Sockets (for Models 7152, 7152-KIT, 7152-MTC-2, 7152-MTC-10)

Model 7156-KIT 37-Pin, Mass-Terminated Connector

Model 7164-KIT 50-Pin, Mass-Terminated Connector (for Models 7164-D, 7164-M, 7164-MTR)

Model 7164-MTR 50-Pin, Mass-Terminated Bulkhead Mount Receptacle (for Models 7164-D, 7164-M, 7164-MTC-10)

Model 7169-KIT 20-Pin, Mass-Terminated Connector (for Model 7169A)

Model 7169-MTR Mass-Terminated Bulkhead Mount Receptacle (for Models 7169A, 7169-MTC-3)

Model 7703-306A DB50 Male Connector Kit (Solder Cup) with Shell

Model 7709-308A DB25 Male Connector Kit (Solder Cup) with Shell

Model 7712-SMA-N SMA Female N Type Male Adapter

Model 7755 50 Ohm Feed-Through Terminator (for Models 776, RG 58 Cable)

Model 7788 50-Pin D Subconnector Kit (for Models 7703, 7705, Modules w/ D Subconnectors)

Model 7789 D-Shell Kit w/ 50-Pin and 25-Pin Connectors

Model 7790 D-Shell Connector Kit w/ 50-Pin Male, 50-Pin Female and 25-Pin Male Connectors

Model 7797 Calibration Extender Board (for Model 2750)

Model 8502 Trigger Link to BNC Break-Out Box (for Models 7001, 7002, 2000 Series, 2400 Series, KPC-TM)

Model 8610 Low Thermal Shorting Plug (for Models 2000, 2001, 2002, 2010)

Model 8620 General Purpose 4-Wire DMM Shorting Plug

Model 8680 RTD Probe Adapter (for Models 2001, 2002, 2010)

Model BG-18 Dual Banana to BNC Coaxial Adapter for adapting connection on instrument with dual banana jack

Model CAP-18 Protective Shield/Cap

Model CAP-31 Protective Shield/Cap (for 3-Lug Triax Connectors)

Model CS-400 DB25 Male Solder Cup (for Models 213, C126-1 Cable)

Model CS-440 2-Lug Female Bulkhead Connector (for Models 220, 263, Fixtures)

Model CS-458 Interlock Connector Kit

Model CS-565 BNC Barrel (for BNC Interconnect)

Model CS-631 3-Lug Male Triax Cable Mount Connector (for Model SC-22 Cable)

Model CS-751 Female to Female, 3 Lug Triax Connector (for Model 2500, 6517A, 236, 237, 238)

Model CS-846 Eight-Position Connector with Screw Terminals for connection to test leads

Model CS-970 High-Voltage Bulkhead Connector (for Models 248, 248-SHV Cable)

Apparecchiature di prova

Model 8009 Resistivity Test Chamber (for Models 6517A, 6517B)

Model 8101-4TRX Component Test Fixture - Optimized for low voltage device testing

Model 8101-PIV Component Test Fixture - Optimized for low voltage device testing

Model LR:8028 Component Test Fixture - Optimized for device testing at up to 200V/1A